M. Rangapuram, S. K. Dasari, J. W. Newkirk, K. Chandrashekhara, H. Misak, P. R. Toivonen, D. Klenosky, T. Unruh, and J. Sam., "Performance evaluation of composite sandwich structures with additively manufactured aluminum honeycomb cores with increased bonding surface area", Journal of Polymer Composites, 2023

Zhang, Xinchang, Tan Pan, Aaron Flood, Yitao Chen, Yunlu Zhang, and Frank Liou., "Investigation of copper/stainless steel multimetallic materials fabricated by laser metal deposition" Journal of Materials Science and Engineering, 2021

O. Fashanu, M. Rangapuram, A. Abutunis, J. Newkirk, K. Chandrashekhara, H.Misak, D. Klenosky., "Mechanical Performance of Sandwich Composites with Additively Manufactured Triply Periodic Minimum Surface Cellular Structured Core" Journal of Sandwich Structures and Materials, 2021

Zhang, Xinchang, Cheng Sun, Tan Pan, Aaron Flood, Yunlu Zhang, Lan Li, Frank Liou., "Additive  Manufacturing  of  Copper – H13  Tool  Steel  Bi-metallic  Structures  via Ni-based Multi-interlayer" Journal of Additive Manufacturing, 2020.

Pan, Tan, Xinchang Zhang, Tomoya Yamazaki, Austin Sutton, Wenyuan Cui, Lan Li, and Frank Liou., "Characteristics of Inconel 625 - Copper Bimetallic Structure Fabricated by Directed Energy Deposition" Journal of International Journal of Advanced Manufacturing Technology,2020.

S. Anandan, R. Hussein, S. Anandan, M. Spratt, J. Newkirk, K. Chandrashekhara, H.Misak, M. Walker., "Effective Elastic Moduli of Metal Honeycob Using Selective Laser Melting" Journal of Rapid Prototyping, 2020

M. Spratt, S. Anandan, R. Hussein, J. Newkirk, K. Chandrashekhara,  H.Misak, M. Walker., "Build Accuracy and Compression Properties of Additively Manufactured 304L Honeycombs" Journal of Rapid Prototyping, 2020

Li, H., Bristow, D. A. and Landers, R. G., "A switched estimation strategy based on Kalman filtering for compensating laser tracker ADM shift," Precision Engineering, 56, 2019.  https://doi.org/10.1016/j.precisioneng.2019.01.008

Zhang, X., Cui, W., Li, W., & Liou, F., "A Hybrid Process Integrating Reverse Engineering, Pre-Repair Processing, Additive Manufacturing, and Material Testing for Component Remanufacturing," Materials, 12(12), 2019.  https://doi.org/10.3390/ma12121961

Hojjatzadeh, S.M.H., Parab, N.D., Yan, W., Guo, Q. L., Xiong, L. H., Zhao, C., Escano, L. I., Qu, M. L., Xiao, X. H., Fezzaa, K., Everhart, W., Sun, T. and Chen, L. Y., "Pore elimination mechanisms during 3D printing of metals," Nature Communications , 0, 3088, 2019. https://doi.org/10.1038/s41467-019-10973-9

Guo, Q. L., Zhao, C., Qu, M. L., Xiong, L. H., Escano, L. I., Hojjatzadeh, S. M. H., Parab, N. D., Fezzaa, K., Everhart, W., Sun, T. and Chen, L. Y., "In-situ characterization and quantification of melt pool variation under constant input energy density in laser powder bed fusion additive manufacturing process," Additive Manufacturing, 26, pp. 600-609, 2019.  https://doi.org/10.1016/j.addma.2019.04.021

Parab, N. D., Xiong, L. H., Guo, Q. L., Guo, Z., Kirk, C., Nie, Y., Xiao, X., Fezzaa, K., Everheart, W., Chen, W., Chen, L. and Sun, T., "Investigation of Dynamic Fracture Behavior of Additively Manufactured Al-10Si-Mg Using High-speed Synchrotron X-ray Imaging," Additive Manufacturing, 30, 100878, 2019. https://doi.org/10.1016/j.addma.2019.100878

Fashanu, O., Buchely, M. F., Spratt, M., Newkirk, J., Chandrashekhara, K., Misak, H. and Walker, M., "Effect of SLM Build Parameters on the Compressive Properties of 304L Stainless Steel," Journal of Manufacturing and Materials Processing, 3, 43, 2019. https://doi.org/10.3390/jmmp3020043 

Anandan, S., Dhaliwah, G. S. Ganguly, S. and Chandrashekhara, K., "Investigation of Sandwich Composite Failure under Three-Point Bending: Simulation and Experimental," Journal of Sandwich Structures and Materials, 2018.  https://doi.org/10.1177/1099636218791162

Anandan, S., Hussein, R., Chandrashekhara, K., Spratt, M., Newkirk, J., Misak, H. and Walker, M., "Failure in Metal Honeycombs Manufactured by Selective Laser Melting of 304L Stainless Steel Under Compression," Virtual and Physical Prototyping Journal, 14, 2018. https://doi.org/10.1080/17452759.2018.1531336

Flood, A. and Liou, F., "Review of Metal AM Simulation Validation Techniques," Journal of Mechanics Engineering and Automation, 8, pp. 43 - 52, 2018. https://doi.org/10.17265/2159-5275/2018.02.001

Ma, L., Bazzoli, P., Sammons, P. M., Landers, R. G. and Bristow, D. A., "Modeling and Calibration of High-order Joint-dependent Kinematic Errors for Industrial Robots," Robotics and Computer Integrated Manufacturing, 50, pp. 153 - 167, 2018. https://doi.org/10.1016/j.rcim.2017.09.006

Taylor, G., Wang, X., Mason. L., Leu, M. and Chandrashekhara, K., "Flexural Behavior of Additively Manufactured Ultem 1010: Experiment and Simulation," Rapid Prototyping Journal, 24, 2018. https://doi.org/10.1108/RPJ-02-2018-0037

Yan, L., Zhang, Y., Newkirk, J., Liou, F., Thomas, E. and Baker, A., "Investigation of Machining Collant Residue Cleaning Methods for Ti6Al4V Part Fabrication through Hybrid Manufacturing Process," Manufacturing Letters, 16, pp. 10 - 13, 2018. https://doi.org/10.1016/j.mfglet.2018.02.016

Liu, R., Wang, Z., Sparks, T., Liou, F. and Nedic, C., "Stereo Vision Based Repair of Metallic Components," Rapid Prototyping Journal, 23, pp. 65 - 73, 2017. https://doi.org/10.1108/RPJ-09-2015-0118

Creamer, J., Sammons, P. M., Bristow, D. A., Landers, R. G., Freeman, P. L. and Easley, S. J., "Table-Based Volumetric Error Compensation of Large 5-Axis Machine Tools," ASME J. of Manufacturing Science and Engineering, 139, 2, 2017. https://doi.org/10.1115/1.4034399

Creamer, J., Bristow, D. A. and Landers R. G., "Selection of Limited and Constrained Compensation Tables for Five-Axis Machine Tools," International J. of Advanced Manufacturing Technology, 92, pp. 1315 - 1327, 2017.  https://doi.org/10.1007/s00170-017-0230-4

Motaparti, K. P., Taylor, G., Leu, M. C., Chandrashekhara, K., Castle, J. and Matlack, M., "Experimental Investigation of Effects of Build Parameters on Flexural Properties in Fused Deposition Modelling Parts," Virtual and Physical Prototyping, 12, 3, pp. 207 - 220, 2017.  https://doi.org/10.1080/17452759.2017.1314117

Anandan, S., Dhaliwal, G. S., Samaranayake, V. A., Chandrashekhara, K., Berkel, T. and Pfitzinger, D., "Influence of cure conditions on out-of-autoclave bismaleimide composite laminates," Journal of Applied Polymer Science, 2016.  https://doi.org/10.1002/app.43984

Bheemreddy, V., Huo, Z., Chandrashekhara, K. and Brack, R. A., "Modeling and Simulation of Cure Kinetics and Flow in Cavity-Molded Composites," Journal of the Americal Helicopted Society, 61, 2, pp. 1 - 10, 2016. https://doi.org/10.4050/JAHS.61.022004

Anandan, S., Dhaliwal, G. S., Samaranayake, V. A., Chandrashekhara, K., Berkel, T. R. and Pfitzinger, D., "Processing and Performance of Out-of-Autoclave Bismaleimide Composite Sandwich Structures," SAMPE Journal (Feature Article), 52, 3, pp. 44 - 53, 2016. https://www.researchgate.net/publication/304252696

A.Wood, O. Fashanu, S. Dasari, A. Abutunis, J. Newkirk,  and K. Chandrashekhara., "Impact Behavior of Sandwich Composite Panels Using Additively Manufactured Metal Cellular Core", CAMX Conference

Fischer, J. D., Woodside, M. R., Gonzalez, M. M., Lutes, N. A., Bristow, D. A. and Landers, R. G., "Iterative Learning Control of Single Point Incremental Sheet Forming Process Using Digital Image Correlation," Procedia Manufacturing (NAMRC), 34, pp. 940 - 949, 2019.  https://doi.org/10.1016/j.promfg.2019.06.108

Gonzalez, M. M., Lutes, N. A., Fischer, J. D., Woodside, M. R., Bristow, D. A. and Landers, R. G., "Analysis of Geometric Accuracy and Thickness Reduction in Multistage Incremental Sheet FOrming Using Digital Image Correlation," Procedia Manufacturing (NAMRC), 34, pp. 950 - 960, 2019. https://doi.org/10.1016/j.promfg.2019.06.105

Zhang, X., Chen, Y., Pan, T., Cui, W., Li, L. and Liou, F., "Joining of Copper and Stainless Steel 304L Using Direct Metal Depositions," Proceedings of the 30th Annual Solid Freeform Fabrication Symposium, pp. 388 - 403, 2019. 

Murphy, D., Fashanu, O., Spratt, M., Newkirk, J., Chandrashekhara, K., Heath, M. and Klenosky, D., "Compressive and Bending Performance of Selectively Melted AlSi10Mg Structures," Proceedings of the 30th Annual Solid Freeform Fabrication Symposium, pp. 2177 - 2187, 2019.

Fashanu, O., Buchely, M. F., Hussein, R., Anandan, S., Spratt, M., Newkirk, J., Chandrashekhara, K., Misak, H. and Walker, M., "The Influence of Build Parameters on the Compressive Properties of Selective Laser Melted 304L Stainless Steel," Proceedings of the 29th Annual Solid Freeform Fabrication Symposium, pp. 1327 - 1333, 2018. 

Flood, A. and Liou, F., "Effect of Environmental Variables on Ti-64 AM Simulation Results," Proceedings of the 29th Annual Solid Freeform Fabrication Symposium, pp. 1865 - 1872, 2018.

Pan, T., Karnati, S. and Liou, F., "General Rules for Pre-process Planning in Powder Bed Fusion System - A Review," Proceedings of the 29th Annual Solid Freeform Fabrication Symposium, pp. 1161 - 1173, 2018.

Spratt, M., Anandan, S., Hussein, R., Newkirk, J., Chandrashekhara, K., Misak, H. and Walker, M., "The Influence of Wall Thickness on the Compressive Properties of 304L Honeycombs Fabricated by SLM," Proceedings of the 29th Annual Solid Freeform Fabrication Symposium, pp. 708 - 715, 2018.

Taylor, G., Anandan, S., Murphy, D., Leu, M. and Chandrashekhara, K., "Fracture Toughness of Additively Manufactured Ultem 1010," Proceedings of the 2018 CAMX Conference, 2018.

Yan, L., Cui, W., Newkirk, J., Liou, F., Thomas, E., Baker, A. and Castle, J., "Mechanical Properties Evaluation of Ti-6Al-4V Thin-wall Structure Produced by a Hybrid Manufacturing Process," Proceedings of the 29th Annual Solid Freeform Fabrication Symposium, pp. 291 - 301, 2018. 

Yan, L., Newkirk, J., Liou, F., Thomas, E., Baker, A. and Castle J., "Fast Prediction of Thermal History in Large-scale Part Fabricated via a Laser Metal Deposition Process," Proceedings of the 29th Annual Solid Freeform Fabrication Symposium, pp. 517 - 526, 2018.

Zhang, X., Cui, W., Hill, L., Li, W. and Liou, F., "Development of Pre-repair Machining Strategies for Laser-aided Metallic Component Remanufacturing," Proceedings of the 29th Annual Solid Freeform Fabrication Symposium, pp. 302 - 319, 2018.

Li, H., Landers, R. G. and Bristow, D. A., "Modeling of Absolute Distance Meter Shift Inside Laser Trackers," Proceedings of the ASME Manufacturing Science and Engineering Conference, Paper No. MSEC2017-3028, 2017. https://doi.org/10.1115/MSEC2017-3028

Yan, L., Hill, L., Newkirk, J. and Liou, F., "Investigation of Build Strategies for a Hybrid Manufacturing Process Progress on Ti-6AL-4V," Proceedings of the 28th Annual Solid Freeform Fabrication Symposium, pp. 1846 - 1852, 2017. 

Chen, X., Yan, L., Newkirk, J. and Liou, F., "Design and Fabrication of Functionally Graded Material from Ti to γ-TiAl by Laser Metal Deposition," Proceedings of the 28th Annual Solid Freeform Fabrication Symposium, pp. 148 - 159, 2017.

Thomas, B., Sutton, A., Leu, M. and Doiphode, N., "Bonding of 304L Stainless Steel to Grey Cast Iron by Selective Laser Melting," Proceedings of the 28th Annual Solid Freeform Fabrication Symposium, p. 307 - 320, 2017.

Qing, J., Van Aken, D. C., Buchely, M. F., Wlaker, M., Juusola, R. and Goethe, J., "Solid Silver Embrittlement of Ti-6Al-2Sn-4Zr-2Mo Alloy," Proceedings of the Materials Science & Technology Conference, 2017. https://doi.org/10.7449/2017mst/2017/mst_2017_28_36

Anandan, S., Dhaliwal, G., Chandrashekhara, K., Luchini, T., Buchok, A. and Castle, J., "Investigation of Sandwich Composite Failure under Flexural Loading: Simulation and Experimental Validation," Proceedings of the CAMX Conference, 2017. https://doi.org/10.1177%2F1099636218791162

Taylor, G., Wang, X., Mason, L., Leu, M., Chandrashekhara, K., Matlack, M., Castle, J. and Schniepp, T., "Optimization of Ultem 1010 Fused Deposition Modeling Specimens for Flexual Behavior," Proceedings of the CAMX Conference, 2017. 

Anandan, S., Dhaliwal, G. S., Chandrashekhara, K., Berkel, T. R. and Castle, J., "Progressive Damage Modeling of Sandwich Composites Under Edgewise Compression," Proceedings of the CAMX Conference, 2016.

Motaparti, K. P., Taylor, G., Leu, M. C., Chandrashekhara, K., Castle, J. and Matlack, M., "Experimental Investigation of Effects of Build Parameters on Flexural Properties in Fused Deposition Modeling Parts," Proceedings of the CAMX Conference, 2016.

Taylor, G., Wang, X., Mason, L., Leu, M. C., Chandrashekhara, K., Matlack, M. and Castle, J., "Investigation of ULTEM 1010 FDM Sparse-build Parts using Design of Experiments and Numerical Simulation," Proceedings of the CAMX Conference, 2016.

Ma, L., Bazzoli, P., Sammons, P. M., Landers, R. G. and Bristow, D. A., "Modeling and Compensation of Joint-Dependent Kinematic Errors in Robotic Manipulators," Proceedings of the International Symposium on Flexible Automation, 2016.

Motaparti, K. P., Taylor, G., Leu, M. C., Chandrashekhara, K., Castle, J. and Matlack, M., "Effects of Build Parameters on Compression Properties for ULTEM 9085 Parts by Fused Deposition Modeling," Proceedings of the 27th Solid Freeform Fabrication Conference, pp. 964 - 977, 2016. 

Meng, X., Mason, L., Taylor, G., Wang, X., Leu, M. C., Chandrashekhara, K., Matlack, M. and Castle, J., "Effect of Sparse-Build Internal Structure on Performance of Fused Deposition Modeling Tools Under Pressure," Proceedings of the 27th Solid Freeform Fabrication Conference, pp. 2337 - 2347, 2016.

Bala, P. and Galecki, G., "Model of Surface Roughness and its Verification in Abrasive Waterjet Cutting of 1 inch Thick Graphite/Epoxy Composite," Proceedings of the Defense Manufacturing Conference, 2016.